Description

Edelbrock Pro-Flo 4 EFI kit #35650 for 1970-91 AMC 304 360 390 401 c.i V8 engines. The EFI kit comes with a 4150-Style Single plane satin finish Victor Intake manifold and 35LbHr Injectors capable of 550 Max HP. The Edelbrock Pro-Flo 4 EFI Kit #35650 for 1970-1991 AMC 304 360 390 401 CID engines is a fully sequential multi-port injection system designed with a fuel injector strategically positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance Victor Jr.-style single-plane intake manifold that comes preassembled with high-flow injectors fuel rails and 4150-flange throttle body. All supporting sensors are included along with distributor wire harnesses and ECU. The Victor manifold is designed with a larger cross-sectional area in the plenum and larger runners for high-horsepower and/or large cubic-inch applications. This kit uses 35 lb/hr injectors and is rated for 550 horsepower at 58 PSI of fuel pressure. Calibration of the Pro-Flo 4 is a simple process with a Setup Wizard providing guidance through the E-Tuner's initial programming. Once provided with basic information such as type of engine cubic inches firing order and cam profile the E-Tuner then selects the most appropriate base calibration. Once the base calibration is set the self-learning E-Tuner takes over to continually maximize the fuel map for your specific engine configuration even compensating for changes in altitude and weather. The E-Tuner provides more advanced tuning options that allow precise control over cold starts and acceleration while retaining the simplicity that Pro-Flo systems are known for. No laptop tuning is required.The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.

• Specifications

  • Bore Diameter: 1.75"
  • Distributor Cap Included: Yes
  • Finish: Satin
  • Flange Type: 4150
  • Fuel Injector Type: 35 lb/hr
  • Fuel Pressure Port: 1/8-27 NPT
  • Gasket Or Seal Included: Yes
  • Idle Air Control Motor Included: Yes
  • Manifold Height: 5.74"
  • Maximum Horsepower: 500 @ 43 psi/550 @ 58 psi
  • Quantity: Kit
  • System Type: Traditional 4150-Style Kit
  • Wire Harness Included: Yes
  • Wiring Harness Included: Yes

• Product Fits

  • American Motors Ambassador 1970-1974
  • American Motors AMX 1970-1978
  • American Motors Concord 1978-1979
  • American Motors Gremlin 1972-1976
  • American Motors Hornet 1970-1977
  • American Motors Javelin 1970-1974
  • American Motors Matador 1971-1978
  • American Motors Pacer 1978-1979
  • American Motors Rebel 1970-1970
  • American Motors Spirit 1979-1979