Description

Hooker Blackheart Gen III Hemi Swap Exhaust Manifolds - Low Profile Hooker Blackheart Gen III Hemi swap exhaust manifolds are one part of a fully engineered swap system that provides maximum component clearances and ideal drivetrain geometry. These manifolds are designed to fit a wide range of swap applications where clearance is limited. Fitment has been confirmed on several popular platforms, see below. These exhaust manifolds are cast from hi-silicon-moly ductile iron and feature 2.5-inch 2-bolt collectors. These manifolds provide clearance to the brake booster, steering shaft, steering box, and starter motor (both left & right-side-mounted starters) and provide clearance for several automatic & manual transmission options. Manifold fitment has been confirmed on the following Gen III Hemi swap vehicles when used with Holley engine swap components: Compatibility with other vehicle combinations and swap components is likely but has not been confirmed. 1967-1972 A-Body manual steering only, requires power steering or shortened steering column tube and u-joint style coupler 1966-1972 B-Body-Manual or Power Steering, Figure 3 in photo & instruction sheet 1970-1974 E-Body-Manual or Power Steering, Figure 3 in photo & instruction sheet 1987-1996 Dodge Dakota 2wd V6/V8 1997-2004 Dodge Dakota 2wd V6/V8-Upper Control arm clearance recommended, Figure 4 in photo & instruction sheet 1972-1993 Dodge D100/D150 Requires Blackheart or White Box engine mounts, transmission crossmember, and appropriate adapter for the desired transmission Recommended Gaskets: 2003-2008 5.7L Hemi Engines Use Gaskets 7594 (or Mopar #'s 530139343AA & 53013944AA) 6.1L, 6.2L, 6.4L, and 2009-up 5.7L Hemi Engines (no EGR) use Gaskets - 7595 (or Mopar #'s 5038098AA & 5038099AA) 2009 & Up 5.7L, and 2011 & Up 6.4L Hemi Engines (with EGR and Heat Shield)-Mopar #'s 5045495AA & 5045496AA BHS582, BHS583, or BHS584 manifolds WILL fit the following engines (* see notes): 5.7L 2003-2008 * 1, 2 5.7L 2009-2020 * 1, 3, 4 6.1L 2005-2010 * 1, 3 6.2L 2015-2020 * 1, 3 6.4L 2011-2020 * 1, 3, 4 1) Holley Engine Mounts or adapter brackets are required for correct fitment 2) Square Exhaust Port-OEM Gasket P/N: 53013943AA and P/N: 53013944AA, or 7594 3) D-shaped exhaust port (No EGR) OEM Gasket P/N: 05038098AA and P/N: 05038099AA, or 7595 4) D-shaped exhaust port (with EGR and heat shield) OEM Gasket P/N: 5045495AA and PN: 5045496AA

• Specifications

  • Header Style: Manifold
  • Collector Diameter: 2.50 inch
  • Primary Tube Dia.:1-3/4 inch
  • Material: Cast Iron
  • Engine: GEN 3 HEMI
  • Finish: Natural
  • Bolt size: M8 x 1.25 x 25 mm

• Product Fits

  • Chevrolet C10 1975-1986
  • Chevrolet C10 Pickup 1973-1974
  • Chevrolet C10 Suburban 1973-1986
  • Chevrolet C15 1982-1987
  • Chevrolet K5 Blazer 1975-1980
  • Chevrolet R10 1987-1987
  • Dodge Challenger 1970-1974
  • Dodge Charger 1966-1970
  • Dodge Coronet 1966-1970
  • Dodge D100 1975-1989
  • Dodge D100 Pickup 1972-1974
  • Dodge D150 1977-1993
  • Dodge Dakota 1987-2004
  • Dodge Dart 1973-1976
  • Dodge Ramcharger 1974-1993
  • GMC C15 1975-1978
  • GMC C15 Suburban 1975-1978
  • GMC C15/C1500 Pickup 1973-1974
  • GMC C1500 Suburban 1979-1986
  • GMC Jimmy 1975-1982
  • GMC R1500 1987-1987
  • GMC R1500 Suburban 1987-1987
  • Plymouth Barracuda 1970-1974
  • Plymouth Belvedere 1966-1970
  • Plymouth Belvedere II 1966-1967
  • Plymouth Duster 1973-1976
  • Plymouth GTX 1967-1970
  • Plymouth Road Runner 1968-1970
  • Plymouth Satellite 1966-1970
  • Plymouth Scamp 1973-1976
  • Plymouth Superbird 1970-1970
  • Plymouth Trailduster 1974-1981
  • Plymouth Valiant 1973-1976

• Documents and Manuals

  • 1101_HOKBHS582.pdf