Description

HIGH-QUALITY ANTI-WEAR HYDRAULIC OIL Phillips 66® Megaflow AW Hydraulic Oil is a high-quality anti-wear hydraulic oil developed for use in a wide variety of industrial and mobile hydraulic system applications. It meets the performance requirements of all major hydraulic pump manufacturers, and is recommended for use in all types of high-pressure, high-speed hydraulic pumps. Features & Benefits Excellent wear protection for hydraulic pumps and motors Excellent oxidation resistance and thermal stability Protects against rust and corrosion Excellent water-separating properties Good foam resistance Applications Hydraulic systems on industrial, mobile and marine equipment Plastic injection molding presses (ISO 46) Elevators, hoists, presses and floor jacks Marine cargo winches and steering systems Mobile construction equipment Service station lifts Air tools and other pneumatic equipment lubricated through air line lubricators Chain drives Electric motor bearings Lightly to moderately loaded enclosed industrial gear drives that do not require a compounded or extreme-pressure (EP) gear oil Megaflow AW Hydraulic Oil meets the requirements of the following industry and OEM specifications: Husky Injection Molding Systems (approved, ISO 46) Kraus Maffei Hydraulic Oil (ISO 46) Bosch Rexroth RE 90220, Type HLP DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP Parker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46, and 68) Eaton-Vickers I-286-S, M-2950-S, 35VQ25A anti-wear performance (brochure 03-401-2010 Rev 1 ISO 32, 46, and 68) Fives Cincinnati P-68 (ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68) (approved) German Steel Industry SEB 181222 ISO 11158:1997, Family H (Hydraulic Systems), Type HM U.S. Steel 127

• Specifications

  • Zinc, wt % 0.043
  • Oxidation Stability
  • Copper Corrosion, ASTM D130 1a
  • Demulsibility, ASTM D1401, minutes to pass 10
  • Failure Load Stage ---
  • Viscosity Index 101
  • TOST, ASTM D943-04a, hours >5000
  • Rust Test, ASTM D665 A&B Pass
  • Density, lbs/gal @ 60°F 7.12
  • Specific Gravity @ 60°F 0.855
  • cSt @ 40°C 22
  • cSt @ 100°C 4.3
  • SUS @ 100°F 106
  • Flash Point (COC), °C (°F) 196 (385)
  • Acid Number, ASTM D974, mg KOH/g 0.38
  • SUS @ 210°F 39.9
  • SO Grade 22
  • Pour Point, °C (°F) -40 (-40)
  • FZG Scuffing Test, ASTM D5182
  • Viscosity
  • Foam Test, ASTM D892, Seq. I, mL 0/0
  • Color, ASTM D1500 0.5

• Documents and Manuals

  • p6651223 Safety Data Sheet Swedish.pdf
  • p6651223 Safety Data Sheet English.pdf