Description

Hays Hydraulic Release Bearing Kit-GM TREMEC TKX,TKO 500,TKO 600 5-Speed Trans Hays offers upgraded release bearing kits for your favorite factory hydraulic equipped car along with applications to convert from a mechanical-style to hydraulic-style release bearing. Typically, this hydraulic conversion offers easier pedal effort over a mechanical release bearing. Our bearing kits offer full adjustability, providing an easy setup with most single or dual disc clutches along with reduced pedal effort. Hays release bearings are a floating design and feature large O-rings and PTFE backup rings in the grooves to help eliminate leakage and offer a long service life. A snap ring on the front of the piston prevents over travel and keeps from pushing the bearing off the sleeve. The sealed bearing snaps in place and is easily serviceable. Our release bearing kits include bearing assembly, bearing retainer (where required), mounting hardware, adjustment shims, and -3AN bleed line. Tremec recommends bearing retainer torque of 12-16 lb-ft (16-18 N-m) The included shims are the following thicknesses: Silver = .065" Black = .040". Requires a .750 inch bore master cylinder with a minimum of 1.1 inch stroke Not compatible with GM LS7 clutch

• Specifications

  • Bleed Line Length (inches):18
  • Bleed Line Included:Yes
  • Bearing Retainer Included:Yes
  • Transmission:Category
  • Brand:Hays
  • Emission Code:5
  • Compressed Length:1.75 inches
  • Fittings Included:Yes
  • Shims Included:Yes
  • Fitting Size:3AN
  • Category:Transmission
  • Warranty:Limited 90 Day Warranty
  • Bearing Style:Hydraulic
  • Feed Line Included:No
  • Amount of Travel:0.700
  • Warning:California Proposition 65

• Documents and Manuals

  • 1101_HAY82-102.pdf