Description

SHIELD® VALOR PREMIUM FULL-SYNTHETIC PASSENGER CAR ENGINE OIL Phillips 66® Shield Valor Full Synthetic Motor Oil is a premium quality, full-synthetic automotive engine oil designed to provide maximum engine protection for both turbocharged gasoline direct injection, conventional gasoline-fueled and flex-fueled passenger cars and light trucks under all operating conditions. It is particularly recommended for vehicles operating at extreme temperatures or under severe driving conditions, such as towing heavy loads. Helps protect against low speed pre-ignition (LSPI) in turbocharged gasoline direct injection engines (TGDI) Exceeds ILSAC GF-6 requirements for new cars under warranty Enhanced performance benefits at extreme temperatures compared with conventional engine oils Outstanding resistance to viscosity and thermal breakdown at high temperatures Protects against sludge and varnish formation Protects against rust and bearing corrosion Low volatility for reduced oil consumption Excellent low temperature pumpability for protection during cold starts Highly resistant to foaming Formulated to protect turbochargers and emission control system catalysts Turbocharged gasoline direct injection, conventional gasoline-fueled and flex-fuel passenger cars, light trucks and sport utility vehicles, including gasoline-electric hybrids, especially when operating under severe conditions Four-stroke cycle gasoline engines in other mobile or stationary equipment Licensed for: ILSAC GF-6A, 0W-20, 5W-20, 5W-30, 10W-30 ILSAC GF-6B, 0W-16 API Service SP, SN PLUS with Resource Conserving GM dexos1® Gen3, 0W-20 and 5W-30 Meets or exceeds the requirements of: Chrysler MS-6395 (except 0W-16) Ford WSS-M2C960-A1 (SAE 5W-20) Ford WSS-M2C961-A1 (SAE 5W-30) Ford WSS-M2C962-A1 (SAE 0W-20) GM6094M (obsolete specification) (does not include 0W-16)

• Specifications

  • Specific Gravity @ 60°F 0.845
  • Color, ASTM D1500 3.0
  • Total Base Number (TBN), ASTM D2896 7.9
  • Viscosity Index 169
  • Pour Point, °C (°F) -45 (-49)
  • @ (°C) (-35)
  • Flash Point (COC), °C (°F) 226 (439)
  • Sulfated Ash, ASTM D874, wt % 0.8
  • cSt @ 100°C 8.0
  • Cold Cranking Viscosity, cP 5,700
  • Density, lbs/gal @ 60°F 7.05
  • High Temp/High Shear Viscosity, cP @ 150°C 2.6
  • Viscosity, Kinematic
  • SAE Grade 0W-20
  • Phosphorus, wt % 0.068
  • cSt @ 40°C 42

• Documents and Manuals

  • p6609021 Safety Data Sheet Swedish.pdf