Phillips 66

Engine Oil

Article number: P6600051

1 QUART (0,946L)

14,15 € RRP

Excl. VAT

20+ in stock

Description

CONVENTIONAL PASSENGER CAR ENGINE OIL Phillips 66® Shield Classic Motor Oil, SAE 20W-50 is a high-quality, conventional automotive engine oil recommended for use in gasoline-fueled passenger cars and light trucks operating under high-temperature conditions, such as towing heavy loads, where the vehicle manufacturer specifies an SAE 20W-50 engine oil. It also may be used in gasoline-fueled competition engines and high-performance street engines where SAE 20W-50 engine oil is preferred. It provides engine protection for both turbocharged gasoline direct injection and conventional gasoline-fueled and flex-fueled passenger cars and light trucks under all operating conditions. It is not recommended for use in new cars under warranty. Features & Benefits Helps protect against low speed pre-ignition (LSPI) in turbocharged gasoline direct injection engines (TGDI) Resists viscosity and thermal breakdown at high temperatures Protects against sludge and varnish formation Protects against wear Protects against rust and bearing corrosion Good foam resistance Applications Turbocharged gasoline direct injection and conventional gasoline-fueled light trucks and sport utility vehicles where a SAE 20W-50 engine oil is specified Gasoline-fueled competition engines and high-performance street engines Licenses & Approvals: Shield Classic Motor Oil is licensed for: API service SP, SN Plus Backward serviceable for use where API SN or earlier "S" category engine oils are recommended

  • Specifications

    • Sulfated Ash, ASTM D874, wt % 0.8
    • Flash Point (COC), °C (°F) 230 (446)
    • Color, ASTM D1500 3.5
    • cSt @ 40°C 181
    • Viscosity Index 127
    • SAE Grade 20W-50
    • High-Temp/High-Shear Viscosity, cP @ 150°C 5.0
    • Phosphorus, wt % 0.077
    • Zinc, wt % 0.086
    • Viscosity, Kinematic
    • Pour Point, °C (°F) -30 (-22)
    • Density, lbs/gal @ 60°F 7.37
    • Additional Details:
    • cSt @ 100°C 19.9
    • Cold Cranking Viscosity, cP 7,500
    • @ (°C) (-15)
    • Total Base Number (TBN), ASTM D2896 7.1
    • Specific Gravity @ 60°F 0.878
  • Documents and Manuals

Alternative products