Description

The Edelbrock Pro-Flo 4 EFI Kit #35780 for Small-Block Chevy engines with Vortec/E-Tec cylinder heads is a fully sequential multi-port injection system designed with a fuel injector strategically positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance Victor-style single-plane intake manifold that comes preassembled with high-flow injectors fuel rails and 4150-flange throttle body. All supporting sensors are included along with wire harnesses and ECU. The Victor manifold is designed with a larger cross-sectional area in the plenum and larger runners for high-horsepower and/or large cubic-inch applications. The manifold is also 0.75 inch taller than the standard LS3 version to promote smoother airflow into the rectangular-port heads. This kit uses 29 lb/hr injectors and is rated for 450 horsepower at 58 PSI of fuel pressure. Calibration of the Pro-Flo 4 is a simple process with a Setup Wizard providing guidance through the E-Tuner application's initial programming. Once provided with basic information such as type of engine cubic inches firing order and cam profile the E-Tuner App then selects the most appropriate base calibration. Once the base calibration is set the self-learning E-Tuner App takes over to continually maximize the fuel map for your specific engine configuration even compensating for changes in altitude and weather. The E-Tuner App provides more advanced tuning options that allow precise control over cold starts and acceleration while retaining the simplicity that Pro-Flo systems are known for. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.;Edelbrock Pro-Flo 4 EFI System for Small-Block Chevy with Vortec/E-Tec Cylinder heads. The EFI System comes with a satin 4150-Style single plane intake & 29 Lb/Hr injectors capable of 450 HP with 58 p.s.i. fuel pressure.

• Features

  • Distributor Cap Included: Yes
  • Gasket Or Seal Included: Yes
  • Finish: Satin
  • System Type: Traditional 4150-Style Kit
  • Flange Type: 4150
  • Wire Harness Included: Yes
  • Throttle Body Type: 4 Barrel
  • Fuel Pressure Port: 1/8-27 NPT
  • Maximum Horsepower: 450
  • Bore Diameter: 1.75 IN
  • Quantity: Kit
  • Manifold Height: 4.58 IN
  • Idle Air Control Motor Included: Yes
  • Wiring Harness Included: Yes
  • Fuel Injector Type: 29 lb/hr

• Product Fits

  • 1996-2002 Chevrolet Suburban 1500
  • 1997-2000 Chevrolet Cargo Van
  • 1999-2000 Chevrolet L30
  • 1996-2002 Chevrolet Camaro
  • 2001-2002 Chevrolet Silverado 2500
  • 1996-2000 Chevrolet Tahoe
  • 1996-1999 Chevrolet K1500
  • 1996-1996 Chevrolet Impala
  • 1996-1999 Chevrolet C2500 Suburban
  • 1996-2002 Chevrolet Corvette
  • 1996-2000 Chevrolet K2500
  • 1996-2002 GMC Savana 1500
  • 2000-2002 Chevrolet Sonora
  • 1996-1999 Chevrolet K2500 Suburban
  • 1996-2002 Chevrolet W4500 Tiltmaster
  • 1996-2000 Chevrolet K3500
  • 1996-1996 Chevrolet Caprice
  • 1996-1999 GMC C2500 Suburban
  • 1996-2002 Chevrolet W3500 Tiltmaster
  • 1996-1999 GMC K1500
  • 1996-2000 Chevrolet C35
  • 1996-2000 GMC K3500
  • 1996-1999 GMC K2500 Suburban
  • 1996-1999 GMC P3500
  • 1996-1999 GMC C1500
  • 1998-2002 GMC W4500 Forward
  • 1996-2000 GMC C2500
  • 1996-1996 Chevrolet GP3500
  • 1996-2002 GMC W3500 Forward
  • 1996-2002 Chevrolet Express 2500
  • 1996-2002 GMC Savana 2500
  • 1996-1999 Chevrolet K1500 Suburban
  • 1996-2002 Chevrolet P30
  • 1996-2002 Chevrolet Express 1500
  • 1996-2000 GMC Yukon
  • 1996-1999 GMC K1500 Suburban
  • 1996-2000 GMC C3500
  • 1996-1999 Chevrolet Silverado
  • 1996-2000 GMC K2500
  • 1996-1996 GMC G3500
  • 1996-2000 Chevrolet C3500
  • 1996-1996 Chevrolet G30
  • 1996-1999 GMC C1500 Suburban
  • 1996-2000 Chevrolet C2500
  • 1996-1999 Chevrolet C1500 Suburban
  • 1996-2002 GMC Savana 3500
  • 1996-2002 Chevrolet Express 3500
  • 1996-1999 Chevrolet C1500