




Engine Complete Assembly
Edelbrock | EDL46756 | Universal fit
Supercharged LT 416 crate engine is a complete 416 c.i.d. supercharged LT engine that produces 851 horsepower and 780 ft-lbs. of torque
47.407,57 € Rek. pris
Exkl. moms
Beställningsvara
ETD: | 70-90 arbetsdagar 15-20 arbetsdagar |
---|
Beskrivning
Edelbrock part #46756 Supercharged LT 416 crate engine is a complete 416 c.i.d. supercharged LT engine that produces an astounding 851 horsepower and 780 ft-lbs. of torque on 91 octane pump gas Edelbrock LT1 Supercharged LT1 crate engine part #46756 produces an astounding 851 horsepower and 780 ft-lbs. of torque on 91 octane pump gas. The foundation of this engine is a brand new GM LT1 Gen V aluminum block with a forged and balanced Manley crankshaft forged Manley H-Beam connecting rods and Manley forged aluminum pistons. The 10.5:1 compression ratio allows for safe and reliable supercharged performance on 91 octane pump gas. Sitting on top is an Edelbrock supercharger system with DP-3C intercooler and Eaton TVS R2650 rotors. Also included are the essential supercharger kit components such as the electric intercooler water pump intercooler plumbing intercooler recovery tank fuel rails fuel injectors mass air flow sensor (MAFS) housing and re-usable air filter. The supercharger equipped on this engine features a driver's side throttle body orientation for ease of intake routing and Camaro ZL1/ CTS-V LT4 belt offset. Pair with universal heat exchangers for a complete installation. Crankshaft: Manley Forged 4340 Pistons: Manley Forged Aluminum - 20cc Rods: Manley Forged H-Beam Camshafts: 243 Deg /254 Deg .660/.651 114 LSA Rocker Arms: GM LT1 Gen V Induction: R2650 Supercharger Cylinder Heads: Edelbrock Performer RPM #77119 Warranty: 2-year / Unlimited mileage Engine Specifications: Finish: Black powder coated Displacement: 416 c.i.d. Bore: 4.065in Stroke: 4.000in Horsepower: 851 hp Torque: 780 ft-lbs. Compression: 10.5:1 Block: GM LT1 Gen V Alum.
-
Specifikationer
- Quantity:Sold Individually
- Horsepower: 851 HJ
- Construction Type: Assembled
- Valve Cover Material:Cast Aluminum
- Water Pump Included:Yes Standard
- Manifold Material: N/A
- Oil Filter Included:Yes
- Air Cleaner Type: Conical
- Rotor Type:Eaton TVS 2650 Black Powder Coated
- Crankshaft Material: Forged Steel
- Piston Type:Forged Aluminum
- Spark Plugs Included:No
- Alternator Included: No
- Displacement: 416 CID
- Plug Wire and Boot Included:Yes
- Camshaft Type:243deg/254deg .660/.651 114 LSA
- ECU Included: No
- Valve Cover Included:Yes
- Outside Pulley Diameter:3.25 IN
- Calibration: Yes
- Cylinder Head Type: Performer RPM
- Rocker Arm Type:LT1
- Timing Cover Included:Yes
- Universal Or Specific Fit:Specific Fit
- Cylinder Head Material: Aluminum
- Compression Ratio: 10.6: 1
- Carburetor Type: Not Included
- Harmonic Balancer Included: Yes
- Torque:779
- Main Bearing Cap Bolt Quantity: 4-Bolt
- Pulley Belt Width:8-Rib
- Throttle Body Included:Yes
- Type:GM LT1 Gen V
- Wire Harness Included:Yes
- Induction Type: Supercharged
- Valve Cover Type:OEM Black Powder Coated
- Flywheel Included: No
- Grade Type: Performance
- Hardware Included: Yes
- Carburetor Choke Type: N/A
- Engine Block Material: Cast Iron
- Ignition Coil Included: Yes
- Oil Pan Included:Yes
- Intake Manifold Type: EFI
- Rear Main Seal Type:1-Piece
- Rocker Arm Ratio:GM OEM
- Distributor Included: No