Beskrivning

Flowtech Long Tube Header - Black Paint Flowtech headers are the perfect combination of performance and value. Flowtech long tube headers are precision engineered using mandrel bent tubing, formed collectors and 5/16" flanges with sealing rings for a leak-free seal. All mounting hardware and gaskets are included for a simple installation. This header is coated in a high heat resistant black paint for a stealthy appearance. NOTE: Will not fit with A.I.R. injection pump. NOTE: It may be necessary to raise the automotive column cross shaft linkage by rotating the mounting brackets on the frame and transmission 180º. NOTE: Will not fit vehicles with power steering. Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Flowtech recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Please call Flowtech tech service at 270-781-9741 for additional information regarding ceramic coated exhaust products. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Flowtech does not recommend the use of header wraps as this will void the warranty.

• Specifikationer

  • Primary Tubing Diameter:1.625 IN
  • Collector Diameter: 3.00"
  • Header Style: Long Tube
  • Port Shape:Rectangular
  • Primary Tube Dia.:1-5/8 inch
  • Sheen Level:Satin
  • Engine: Chrysler Small Block LA
  • Tube Material:Mild Steel
  • Design: Long Tube
  • Tube Wall Thickness:18 GU
  • Primary Tubing Diameter:1-5/8 IN
  • Header Finish: Black Paint
  • Warning:California Proposition 65
  • Bolt size: 5/16-18 x 3/4
  • Gasket Or Seal Included: Yes
  • EGT Port: No
  • Color: Black
  • Mounting Hardware Included: Yes
  • CARB (California) Compliant: No
  • Finish: Painted
  • Grade Type: Performance
  • Flange Thickness: 0.3125"
  • Tube Wall Thickness:.049 IN
  • Material: Mild Steel
  • Emission Code: 4
  • Collector Attachment: 3-Bolt Flange
  • Collector Port Diameter: 3.00"
  • Flange Thickness: 5/16""
  • Oxygen Sensor Port:No

• Passar på

  • Dodge Challenger 1970-1974
  • Dodge Charger 1966-1974
  • Dodge Coronet 1967-1974
  • Dodge Dart 1967-1974
  • Plymouth Barracuda 1967-1974
  • Plymouth Belvedere 1967-1970
  • Plymouth Belvedere II 1967-1967
  • Plymouth Cuda 1970-1974
  • Plymouth Duster 1970-1974
  • Plymouth GTX 1968-1968
  • Plymouth Road Runner 1971-1974
  • Plymouth Satellite 1967-1974
  • Plymouth Valiant 1967-1969

• Documents and Manuals

  • 1101_FLO13100FLT.pdf